Ecowitt and the brands that sell it
WS View Plus custom server setup (HP3500, Froggit, Sainlogic)
Stations set up in the WS View Plus app (Ecowitt's HP3500 and GW1000, Froggit's consoles, Sainlogic's WS3500, Eurochron's EFWS 2900) can send their readings to a server of your own with the Weather Underground upload, beside their other uploads. The Customized screen is in the app. These steps, from Ecowitt's manuals, point yours at Dank Weather.
Your setup key
The setup key goes in the path, and adds the station to your Dank Weather account with its first reading. Make an account or sign in and this page fills yours in.
Steps
Connect the console in WS View Plus
Plug the console into its power adapter and install WS View Plus from the App Store or Google Play. Put the console in Wi-Fi setup mode: on most, hold WIND and PRESSURE for 5 seconds, until the Wi-Fi icon and M-B flash (on the HP3500 and HP3501, it's Wi-Fi Reset in the console's Factory mode, under MENU).
In WS View Plus, follow the steps to connect a new device. When it asks, join the console's network, EasyWeather-WIFI followed by a few characters, then pick your 2.4 GHz network.
Already on Wi-Fi? Skip to the next step.
Open Customized
In WS View Plus's device list, tap your console. Its Upload screen opens: tap Next past Wunderground, Weathercloud and the others until you reach Customized.
Froggit's consoles, Sainlogic's WS3500, Eurochron's EFWS 2900 and Ecowitt's GW1000 gateway are set up here too.
Enter Dank Weather's settings
Tap Enable and Wunderground, fill in the fields as below and save.
- Customized
- Enable
- Protocol Type Same As
- WundergroundNot Ecowitt: Dank Weather reads the Wunderground and Ambient Weather protocols.
- Server IP / Hostname
- api.dankweather.com
- Path
- /weatherstation/updateweatherstation.php?Leave it as it is: Dank Weather takes Weather Underground's own path. With a setup key, the path adds the station to your account. Older consoles have no Path field: they send to Weather Underground's own path, and you add the station by its ID and key at the end.
- Station ID
- Any nameYour own, such as smith-backyard, up to 40 characters. Your station is listed under it until you rename it.
- Station Key
- A password you make upDank Weather knows your station by its ID and key together, and never stores the key. Keep a note of both: they add the station to your account if the setup key doesn't.
- Port
- 80
- Upload Interval
- 16Seconds. 16 is the shortest most stations allow.

Customized with Wunderground picked, before it's filled in. Add it to your account
Without a setup key the station sends its readings but isn't added to your account: make a setup key above and use the new path, or add it here. Once it has sent its first reading (about a minute after you save), enter the station ID and key you gave it.
Sign in (or make an account) and this step has a form to add it by its station ID and key.
- Enter the path exactly as shown, ending in the
?. - Use port 80. Stations send to a custom server over plain HTTP, not HTTPS.
- Changing the station ID or key later starts a new station on Dank Weather.
- Screen from Ecowitt's HP3501 manual.
Questions
- Why the Wunderground protocol and not Ecowitt's?
- Dank Weather reads the Weather Underground and Ambient Weather uploads, not Ecowitt's own.
- Does it still upload to Ecowitt.net and Weather Underground?
- Yes. Customized is an upload of its own, beside the others.
- What are the station ID and station key?
- A name and a password you make up. Dank Weather knows your station by the two together and never stores the key, so changing either one later starts a new station.
- Why port 80 and not HTTPS?
- The consoles send to a custom server over plain HTTP only, on port 80.
Why send it to Dank Weather
- Every reading is kept and shows up live on your station's page.
- History charts of temperature, wind, rain, pressure and air quality.
- A forecast at your station, and in the lower 48, the next two hours of rain from live radar.
- Your station in Home Assistant, with the Dank Weather integration.