Ecowitt and the brands that sell it

Ecowitt WS2910, WS2320, WN1980 and WS3900 custom server setup

The WS2910, WS2320, WN1980 and WS3900 display consoles can send their readings to a server of your own with the Weather Underground upload, beside their uploads to Ecowitt.net and Weather Underground. The Customized setting is on the console's settings page, or in the Ecowitt app. These steps, from Ecowitt's manuals, point yours at Dank Weather.

Your setup key

The setup key goes in the path, and adds the station to your Dank Weather account with its first reading. Make an account or sign in and this page fills yours in.

Steps

  1. Put the console in Wi-Fi setup mode

    With the console on its power adapter (its Wi-Fi is off on batteries alone), hold two buttons until the Wi-Fi icon flashes:

    • WS2910: WIND + and PRESSURE − for 5 seconds. Its network is EasyWeatherPro-xxxxxx.
    • WS2320: ∨ and ALARM for 5 seconds. Its network is EasyWeatherPro-xxxxxx.
    • WN1980: TEMP + and RAIN PRE for 2 seconds. Its network is WN1980x-WIFIxxxx.
    • WS3900, WS3910: TEMP and − for 2 seconds. Its network is WS3900x-WIFIxxxx or WS3910x-WIFIxxxx.
  2. Open the console's settings page

    From a phone or computer, join the console's network (it has no internet; that's expected) and go to http://192.168.4.1 in a browser. Leave the password blank and log in.

    Not on your Wi-Fi yet? Open Local Network, pick your 2.4 GHz network with Scan Router, enter its password and click Apply.

  3. Fill in Customized

    Open Weather Services. At the bottom, in Customized, choose Enable and Wunderground, fill in the fields as below and save.

    Or use the Ecowitt app: open the station, tap ⋯ at the top right, then Others, DIY Upload Servers and Customized.

    Customized
    Enable
    Protocol Type Same As
    Wunderground
    Not Ecowitt: Dank Weather reads the Wunderground and Ambient Weather protocols.
    Server IP / Hostname
    api.dankweather.com
    Path
    /weatherstation/updateweatherstation.php?
    Leave it as it is: Dank Weather takes Weather Underground's own path. With a setup key, the path adds the station to your account.
    Station ID
    Any name
    Your own, such as smith-backyard, up to 40 characters. Your station is listed under it until you rename it.
    Station Key
    A password you make up
    Dank Weather knows your station by its ID and key together, and never stores the key. Keep a note of both: they add the station to your account if the setup key doesn't.
    Port
    80
    Upload Interval
    16
    Seconds. 16 is the shortest most stations allow.
    The Customized section of a GW2000's Weather Services page: Customized Disable or Enable, Protocol Type Same As Ecowitt, Wunderground or MQTT, Server IP / Hostname, Path, Port and Upload Interval
    Customized on a GW2000's page, before it's filled in.
    Three Ecowitt app screens: the ⋯ menu with Others marked, the Edit Gateway screen with its DIY Upload Servers button, and the Supported Servers List ending in Customized
    In the Ecowitt app: Others, DIY Upload Servers, Customized.
  4. Add it to your account

    Without a setup key the station sends its readings but isn't added to your account: make a setup key above and use the new path, or add it here. Once it has sent its first reading (about a minute after you save), enter the station ID and key you gave it.

    Sign in (or make an account) and this step has a form to add it by its station ID and key.

  • Enter the path exactly as shown, ending in the ?.
  • Use port 80. Stations send to a custom server over plain HTTP, not HTTPS.
  • Changing the station ID or key later starts a new station on Dank Weather.
  • Screens from Ecowitt's GW2000 and GW1100 manuals.

Questions

Why the Wunderground protocol and not Ecowitt's?
Dank Weather reads the Weather Underground and Ambient Weather uploads, not Ecowitt's own.
Does it still upload to Ecowitt.net and Weather Underground?
Yes. Customized is an upload of its own, beside the others.
What are the station ID and station key?
A name and a password you make up. Dank Weather knows your station by the two together and never stores the key, so changing either one later starts a new station.
Why port 80 and not HTTPS?
The consoles send to a custom server over plain HTTP only, on port 80.

Why send it to Dank Weather

  • Every reading is kept and shows up live on your station's page.
  • History charts of temperature, wind, rain, pressure and air quality.
  • A forecast at your station, and in the lower 48, the next two hours of rain from live radar.
  • Your station in Home Assistant, with the Dank Weather integration.

More guides

Every setup guide