Stations without a custom server

Davis, Tempest and AcuRite: sending to a custom server

Davis WeatherLink, Tempest and AcuRite Access upload only to their own cloud. Weather software on your own network can read them and send their readings to Dank Weather.

Steps

  1. Your station can't send to a server of your own

    Davis WeatherLink, Tempest and AcuRite Access upload to their own cloud, which can pass your readings on to Weather Underground but not to any other server. Netatmo and La Crosse View can't either.

  2. Run weather software beside it

    WeeWX, Meteobridge and Cumulus MX read these stations on your own network and can send to Dank Weather:

    • Davis WeatherLink Live: all three read it (WeeWX with a WeatherLink Live driver).
    • Davis Vantage Pro2 or Vue with a data logger: all three read the console.
    • Davis WeatherLink Console: it keeps its data to itself, but Cumulus MX can read it back from WeatherLink.com.
    • Tempest: all three listen to its hub (WeeWX with a WeatherFlow UDP driver).
    • AcuRite Access: only by catching its uploads on your network, with WeeWX's Interceptor driver.

    Then pick that program above for its steps.

Why send it to Dank Weather

  • Every reading is kept and shows up live on your station's page.
  • History charts of temperature, wind, rain, pressure and air quality.
  • A forecast at your station, and in the lower 48, the next two hours of rain from live radar.
  • Your station in Home Assistant, with the Dank Weather integration.

More guides

Every setup guide