Ambient Weather

Ambient Weather WS-1965 custom server setup

The WS-1965 can send its readings to a server of your own, beside its uploads to AmbientWeather.net and Weather Underground. Its Customized setting is on the console's Weather Services page. These steps, from Ambient Weather's manual, point it at Dank Weather.

Your setup key

The setup key goes in the path, and adds the station to your Dank Weather account with its first reading. Make an account or sign in and this page fills yours in.

Steps

  1. Put the console in Wi-Fi setup mode

    Hold RAIN / PRE and TEMP + on the back of the console until the Wi-Fi symbol on the screen flashes.

  2. Open the console's settings page

    From a phone or computer, join the console's network, WN1965B-WIFIxxxx (it has no internet; that's expected), and go to http://192.168.4.1 in a browser. Leave the password blank and tap Login.

    If the console isn't on your Wi-Fi yet, open Local Network, pick your 2.4 GHz network with Scan Router, enter its password and click Apply.

    A computer's Wi-Fi list showing the network WN1965B-WIFIBC5C, No Internet, open
    The console's network. Yours ends in different characters.
    The console's Local Network page with Router SSID, Scan Router, Wi-Fi Password and an Apply button
    Local Network, where the console joins your Wi-Fi.
  3. Fill in Customized

    Open Weather Services. In its Customized section, choose Enable, fill in the fields as below and save.

    Customized
    Enable
    Protocol Type Same As
    AmbientWeather
    Server IP / Hostname
    api.dankweather.com
    Path
    /aw?
    Port
    80
    Upload Interval
    16
    Seconds. 16 is the shortest most stations allow.
    The console's Weather Services page, starting with the AmbientWeather.net account, interval and MAC address
    Weather Services.
  4. Look for it under Your stations

    Without a setup key the station still sends data, but it isn't added to your account: make a setup key above and use the new path, or email [email protected] to link it.

  • Enter the path exactly as shown, ending in the ?.
  • Use port 80. Ambient stations can't send to a custom server over HTTPS.
  • Dank Weather keeps every reading and recommends the shortest interval your station allows, but the interval is up to you.
  • Screens from Ambient Weather's WS-1965 manual.

Questions

How often can it send?
Set the shortest interval it allows: 16 seconds on most Ambient Weather stations.
Does it still send to AmbientWeather.net?
Yes. Customized is an upload of its own: AmbientWeather.net and Weather Underground carry on as before.
Why port 80 and not HTTPS?
Ambient Weather's consoles send to a custom server over plain HTTP only, on port 80.
Can I pick the Wunderground protocol instead?
Dank Weather reads it too, but Ambient Weather's own protocol carries more of the station's sensors, so pick that one.

Why send it to Dank Weather

  • Every reading is kept and shows up live on your station's page.
  • History charts of temperature, wind, rain, pressure and air quality.
  • A forecast at your station, and in the lower 48, the next two hours of rain from live radar.
  • Your station in Home Assistant, with the Dank Weather integration.

More guides

Every setup guide